Thursday, March 5, 2015

The Concrete Staining Saga: Part 2

Today I am going to share the actual staining process with you!  This was definitely the easier of the two steps.  So if you didn't catch the last post and want to catch up on the stain prep part check that out here.

*Before I start I want to say that we had some fabulous help on this project.  Joseph, Daniel's mom and Jeff were all a HUGE help on this.  Also, this is a wonderful marriage builder, especially if you are quite particular or hangry.  You know your Mother-in-love loves you when she can stand to hear you fighting with her son about the way stain is applied to the floor.  She is a wonderful woman.  You'll see more of her in my next post! While I'm at it, all of our friends and family were so supportive and helpful with all of our house projects! We owe them so much thanks!*

Alright, on to the concrete stain,

First, we prepped the walls by taping up some brown kraft paper on the lower part of the wall.  Sorry for the horrible picture below, but I think you can still see the paper taped to the wall!

Next, you mix up the acid stain. We just followed the instructions on the bottle.  With something so specific, I wouldn't play with the proportions.  Some might not even need water added, but ours did. We put it in this sprayer we bought.  This is almost exactly the one we have, might be a different brand.  It was really easy to use though.  The color we used is called coca-cola.  We got it at JR Industries in Woodstock, GA.  There is likely an equally wonderful place near you that sells concrete stain.    



As you can see, this was a two person gig for us.  I don't think you need two people, but it definitely made it easier.  Daniel pumped it and made sure the pressure was high enough that the sprayer worked properly.  I used the sprayer to get an even coat.  I was quite liberal with the application, I didn't want to miss any spots.  *Make sure you plan your starting spot with your exit!  Don't back yourself into a corner!  We choose to start near the far corner almost opposite the stairs, then worked our way along the back wall.  After finishing one "row" we went back and filled in some holes.  We were nervous that there were some oil spots that didn't come clean during the grinding process and they were kind of beading up instead of accepting the stain.  I just put more stain on those areas, but this probably wasn't necessary because the way the stain set in wasn't a solid color anyway so it was barely noticeable when completed.  I didn't fill in the holes everywhere because we were worried that we would run out of stain and we wanted to finish this project that night!



If you look closely, you can see that the stain almost looks green in one spot.  Well, that's because it is!  When it reacts to the (air, cement, water?) it bubbles and turns green then turns the red-ish orange that it's supposed to be.  Not sure why it does that [I wish I did, sounds like a cool science experiment] but it turns out looking quite lovely!  

This is what it looked like right after we finished.  You can see the thinner spots dried quickly and then other spots looked like little lakes.  


We left it for a couple of hours to dry.  And in fact, we left it 24 hrs, because we didn't do the final step until the next day.  





The final step Daniel did solo.  This reduced the amount of feet that could leave permanent marks in our new floor.  In the last step Daniel sealed the floor with a clear sealer we also got at JR Industries.  This was an easy roll-in-on process.  He did two coats.  The floor now has a nice matte shine to it.  It isn't glossy and slippery but it still has some sheen. :) 

^Daniel hard at work ^

A view of the matte finish. 

Waiting on the floor to dry.  The view of our "completed" basement. 
I use air quotes because everyone tells us (and I know this to be true) a house is never done
But for now, this is a great start! 


We are very happy with the results! What do you think? Would you try something like this? Do you think it would have looked better in a solid opaque paint? Should I have used glitter? ;) 
Tell me what YOU think! 

Thanks for reading!
Love,
Sarah

3 comments:

  1. Of course glitter would have been FABULOUS!!! I believe my husband is much like Daniel who would've disagreed to glitter floors too.
    We have separate rooms in our basement. Do you think I could move all the items in one room and do 3/4ths of the basement and come back to finish the one room? Or do you think it would look too different?

    ReplyDelete
    Replies
    1. As long as you did it the same way and within the same week or so, it would probably look the same. Also it is so varied in color/pattern a slight difference wouldn't be noticeable.

      Delete
  2. I'm so excited!! Thanks to you we have now nailed down what we want to do to our basement :)

    ReplyDelete