The Concrete Staining Saga: Part 2

Today I am going to share the actual staining process with you!  This was definitely the easier of the two steps.  So if you didn't catch the last post and want to catch up on the stain prep part check that out here.

*Before I start I want to say that we had some fabulous help on this project.  Joseph, Daniel's mom and Jeff were all a HUGE help on this.  Also, this is a wonderful marriage builder, especially if you are quite particular or hangry.  You know your Mother-in-love loves you when she can stand to hear you fighting with her son about the way stain is applied to the floor.  She is a wonderful woman.  You'll see more of her in my next post! While I'm at it, all of our friends and family were so supportive and helpful with all of our house projects! We owe them so much thanks!*

Alright, on to the concrete stain,

First, we prepped the walls by taping up some brown kraft paper on the lower part of the wall.  Sorry for the horrible picture below, but I think you can still see the paper taped to the wall!

Next, you mix up the acid stain. We just followed the instructions on the bottle.  With something so specific, I wouldn't play with the proportions.  Some might not even need water added, but ours did. We put it in this sprayer we bought.  This is almost exactly the one we have, might be a different brand.  It was really easy to use though.  The color we used is called coca-cola.  We got it at JR Industries in Woodstock, GA.  There is likely an equally wonderful place near you that sells concrete stain.    

As you can see, this was a two person gig for us.  I don't think you need two people, but it definitely made it easier.  Daniel pumped it and made sure the pressure was high enough that the sprayer worked properly.  I used the sprayer to get an even coat.  I was quite liberal with the application, I didn't want to miss any spots.  *Make sure you plan your starting spot with your exit!  Don't back yourself into a corner!  We choose to start near the far corner almost opposite the stairs, then worked our way along the back wall.  After finishing one "row" we went back and filled in some holes.  We were nervous that there were some oil spots that didn't come clean during the grinding process and they were kind of beading up instead of accepting the stain.  I just put more stain on those areas, but this probably wasn't necessary because the way the stain set in wasn't a solid color anyway so it was barely noticeable when completed.  I didn't fill in the holes everywhere because we were worried that we would run out of stain and we wanted to finish this project that night!

If you look closely, you can see that the stain almost looks green in one spot.  Well, that's because it is!  When it reacts to the (air, cement, water?) it bubbles and turns green then turns the red-ish orange that it's supposed to be.  Not sure why it does that [I wish I did, sounds like a cool science experiment] but it turns out looking quite lovely!  

This is what it looked like right after we finished.  You can see the thinner spots dried quickly and then other spots looked like little lakes.  

We left it for a couple of hours to dry.  And in fact, we left it 24 hrs, because we didn't do the final step until the next day.  

The final step Daniel did solo.  This reduced the amount of feet that could leave permanent marks in our new floor.  In the last step Daniel sealed the floor with a clear sealer we also got at JR Industries.  This was an easy roll-in-on process.  He did two coats.  The floor now has a nice matte shine to it.  It isn't glossy and slippery but it still has some sheen. :) 

^Daniel hard at work ^

A view of the matte finish. 

Waiting on the floor to dry.  The view of our "completed" basement. 

I use air quotes because everyone tells us (and I know this to be true) a house is never done. 

But for now, this is a great start! 

We are very happy with the results! What do you think? Would you try something like this? Do you think it would have looked better in a solid opaque paint? Should I have used glitter? ;) 

Tell me what YOU think! 

Thanks for reading!

Love,

Sarah

The Concrete Stain Saga: part 1

The Second project that we did was also in the basement.  If you missed that first post about our Adventure with Drylok click here.  


Our second project was to use concrete acid stain to cover up oil stains in our floor and seal out moisture coming up from the ground underneath the concrete.  Daniel works at a Jewelry store and they have a stained concrete floor.  We both think it looks really awesome!  (I have seen some that have glitter in them, but I couldn't convince Daniel to sparklify our floors) 

Isn't that pretty? (picture from Google search)

The beginning of this and most DIY and home renovation projects is simple:  CLEAN. Clean the surface thoroughly.  Oh-ho-ho my friend, easier said than done. Easier said than done.  If you have ever tried to clean something that is really old, and porous, you'll understand.  You can't clean ALL the dirt off of 50 year old concrete floors.  You'll drive yourself mad.  But, do your best.  I think we could have gotten more dirt off the floor, but we got a lot of it and the rest is sealed up like a time capsule.  

First we swept the floor.  Then swept it again.  Actually, Daniel swept, he is really great at it.  I sucked up the dirt.  Luckily, we had a shop-vac.  Sweeping is boring so I didn't take a picture of that.  

Next up....The Grinder (read it again in a baseball announcer voice) :)
This process involved a diamond tipped grinder.  OoooOooo Fancy.  Nope not really, this thing was a beast.  [And as my knowledgeable, diamond informed husband told me, they may be diamonds, but they aren't jewelry grade, they are not a good color or clarity so they use them on machinery etc.]  We rented the Beast from Home Depot. (Our store of choice) And it's this great big machine that looks like a floor waxer except that it tries to rip off your arms. Alright, I am exaggerating, a little, but only a little. 

This was after when we were cleaning it. 

 So Daniel and his friend and co-worker Joseph rented the beast after work and started grinding the concrete basement floor.  

This is Joseph.

This is the grinder at work.  Honestly, I wasn't strong enough to steer this thing. 

The goal of the grinder is to scuff up the floor so that it will accept the stain and remove any surface stains.  To do this you have to add water to the floor in small doses so that it stays near the grinder's wheel.  If you don't have enough water the Beast can overheat. We added water with a hose that was fed through our window,  but you could easily use buckets or whatever was easiest for you. 

During the grinding process we met with a small hiccup.  Remember how I said we didn't get up ALL the dirt? Because you can't really get up ALL the dirt?  Well add water and concrete dust to really fine old dirt. What did you get? mud? Lots of mud? Lots of soupy icky mud? Well, you would be right.  This wouldn't have been a big deal except that we couldn't see if all our hard word was paying off.  It was impossible to see any scratches in the concrete until it was dry and clean.  So we had to stop and reassess.  

We got back up.  Another shop-vac to help get up all the mud and someone holding the hose full time.  The mud-sucking was the most time consuming part.  If your concrete is newer, outside or if you can clean it better before hand I think the mud would be less of an issue.  I will say that there is going to be mud even if you have brand-new concrete, because the grinder is essentially a giant sander and we all know that when you sand something you get dust and dust+water=mud.  After we finished grinding the whole basement we went back through with the hose and shop-vacs and rinsed the floor.  Let me tell you, all of our backs hurt and all of us wanted to throw those shop-vacs out the window.  While we are talking about it, two things about those shop-vacs: 1) surprisingly, the smaller one sucked up the water/mud better and 2) it was really hard to get just the right angle so the suction would kick in but eventually with practice it worked. 

This is what it looked like when we were done.  We weren't able to get ALL the water up, so we just let the little puddles air dry.  

When it was all dry, it looked like this. ^^^ If you look closely you can see the circular scratches.  We were so proud of those scratches and glad to see that all the work and frustration had been for a reason! 


Ok, I think that's enough for today.  God bless you if you read all the way to this point. :)  This isn't the most thrilling project out there.  Read the next post to see why we did all this: Concrete staining! 

See ya later,

Sarah

P.S. I love comments. I love to know who's reading and hear your thoughts and opinions! Thanks a bunch!! YOU'RE AWESOME! 

Jumping right in...Our Adventure with DryLok

Today I want to start telling you the story of our renovation process: Moisture proofing the basement.  Are you all jumping up and down with excitement? Yeah me neither.   To be honest, this whole blog is probably going to be a little boring at first, but I want to keep an accurate record and some people actually asked about this so...here it goes.  

First there are some things you should know about us:
Daniel, my husband is a very hard worker, go get 'em, don't rest until it's done or he's burned out kind of guy.  While,  I on the other hand, am a work on ten projects at a time slowly getting them all done.  Daniel is a very time focused man.  If it was up to him, we would never be late.  Which of course means that I am the one who makes us late 90 out of 100 times, the other 10 are reasons out of our control. ;-) 

Now that you know those things about us, you can imagine the frustration we both felt over the course of this renovation.  Our first project was hard to decide on.  Where do you start in a house where EVERYTHING (this is really only a slight exaggeration as you will see) has to be ripped out or painted and cleaned?  Well, we decided to start in the basement.  We figured that we could do what we wanted to the basement and then store stuff down there and move our stuff slowly upstairs as the rest of the house was ready.  As often happens with best laid plans, none of that happened, but more on that in a later post.  

First of all, I regret to inform you that for this particular project, I don't have actual photos of us doing the work.  However, in the picture above you can see the white strip of paint around the bottom of the cinder block wall?  THAT is our first project.  It's this fancy stuff called DryLok.  We found one gallon of it at a yard sale for free along with some other fabulous things including our kitchen light! When we started using this stuff we learned 4 things: 1) It's smelly. ewww. 2) It's thick and the cinder block is greedy when you apply it. 3) this was going to take much longer than we thought and 4) we were going to need quite a bit more.  We had several options: 

a gallon? 

A big bucket? 

  

a different brand? 

I had done a little research on this stuff.  DryLok blocks moisture from coming into your basement, specifically through concrete/cinder block walls.  It's called masonry paint.  The big question was: Is this stuff worth it?  Did we really need it?  We sort of agonized over this.  We didn't want our basement to flood or be damp.  It is "underground" on 2 1/2 sides, but it's not in a flood plain or anything so do we even need to worry about it? Looking back, it definitely wasn't the biggest decision (wait until we get to stain color, eeeekkk!)  This stuff was rather expensive though, as far as paint goes and we had JUST made the biggest purchase of both our lives so far.   So being a "thrifty" (read that: cheapskate), I looked on craigslist.  I found some for $10.  YES!  We bought the rest that we needed.  

****For lack of pictures let me tell you about our basement.  It is a large rectangle.  There is a door at one end and a crawl space that runs the length of one side.  It is open except for support poles here and there and the stairs that come down from the main floor.  One of the shorter walls has a door and the other is solidly holding back all the dirt.  The long wall along the back of the house is mostly windows that are underneath the back deck and about 1/3 holding back the dirt.  The long wall along the front side of the house has a crawl-space going along the length of it so not much of it is actually holding dirt back. ****

The plan was to do all of the basement walls, but once we found how difficult it was to apply properly we opted for the whole wall that is all underground and then about 1/3 of the two long walls. The rest of the way around was mostly the bottom 2  or 3 rows of blocks.  We do plan to finish painting the rest of the basement walls with something other than drylok "someday" (I am beginning to become wary of the elusive someday, because it never gets here!!)  

Here is a sample picture of what it looks like to apply drylok, notice she is using a high nap roller.  This means that there are longer strands on the roller so it can hold more paint and reach all the crevices. (photo from Google)

*Sorry, for the lack of interesting and eye catching photos.  I think I kept track of most of the other projects we did.  Also, I will check with Daniel and see if he has better photos of the drylok project.

 

**My husband would like to point out that proper application of drylok involves etching the walls first, which calls for another product (etching power etc.).  This is tough to do because it is hard to wash cinder blocks without a hose. (Both pictures below are from Google)

      

***David my brother also helped out by doing some minor patching along the floor.  I don't have pictures of him doing it but here is a picture from the internet (Google search) of someone else doing the same thing.  We got the product (drylok fast plug) with the drylok we bought from Craigslist. 

So do you have any questions I didn't answer?  Do you have experience with this stuff?

I would love to know! 

See ya next time,  

Love,

Sarah